Slyde Kung Fu Grip for your handboard

Sweet Grips For Your Handplane

Slyde Handboards recently added a new line of grips to their online shop.  The Kung-Fu Grip is hand-made by Casey Patelski of Cove Pads in beautiful Costa Mesa. We noticed a few of our riders, most notably Willy Cole, retrofitting their Wedge handboards with grips.  Wax works wonders, but these give an unparalleled kung-fu like grip to your handboard and are the next generation in handplane/handboard control. Born from kneeboarding, Casey is now perfecting the latest in wave riding board grip for handplanes.

A few quick pointers as to why these grips rock: 

  • Eliminates the need for wax
  • Improved directional control and grip
  • Absorbs chop shock
  • Grooved grip top surface
  • Single layer, 3/16 inch (5mm) thick
  • Beveled edge
  • Designed with dynamic features
  • Able to leap tall buildings in a single bound

Below are are few words from Casey and Cove Pads:

KM: Why did you start a kneeboard deck pad company?

Slyde Kung Fu Grip for your handboardCasey: Well, I was surfing Romanosky Kneeboards for maybe 30 years, and Ron Romanosky always offered a rubber deck pad that was recessed into the deck of his boards.  That was a lot better than just wax and hard fiberglass and foam that would delaminate in a matter of weeks. It felt pretty good.  So in 2007, I learned about a website called KSUSA.org and saw a whole international perspective of kneeboarding that I had no idea even existed.  That’s where I saw many new board shapes, fin placements and deck pad designs.  Being a product designer and US patent holder, I love to tinker.  When I get into making something I like to make it functional, high performance with superior materials that fits a majority of users, in this case kneelo’s.  I wanted a high performance deck pad and started trying and studying what was on the market at the time.  Just like the story of the Three Bears, some were too grippy, some were too hard, some were too high, some were not durable, and some were just a pad.  I wanted a durable longer one piece, low center of gravity pad, that I didn’t feel under my ribs; to be able to adjust my stance in mid wave in an instant with a quick release and re-grip that offered more leverage in the foot area with a tail block, that I couldn’t get off the shelf.  I went into “make it as good as it could be mode”.   

KM: So what did you do?

Casey:  I started with a clean slate and started researching and developing materials, thicknesses, grip ranges, adhesives, shapes, all being sport specific to knee boarding.  Having a background in engineered rubber and plastics, I had a good resource base to start prototyping with.  I started surfing the new designs myself and selling the pads out of the back of my truck to my buddies at Kneelo Cove.  These guys would eventually come back with input on how the pads were performing.  I would look into the economics and function possibilities and release the next version with the improvements they wanted.  I owe a lot of the Cove Pad success to the guys at Kneelo Cove here in So Cal for all their input and support during the development days and today.  When you start with a clean slate the possibilities are endless. 

KM: What is the current status of Cove Pads now?

Casey:  Well, we have an IPO on the NY stock Exchange…Bill Gates called me last week…and Eric Clapton wants me to give him kneeboarding lessons… you know, the usual.  No, really I think we have a really good formula now for most surfers because I can make Cove Pads for old school style all the way to state of the art knee board surfing, that have a good purpose built- functional design, with quality and durability,  while offering modifiable design options to a surfers performance requirements.   All Cove Pads are hand made.

As of March 2012, some of the top wining competing kneelo’s are either surfing on Cove Pads or we are designing one for them.  Thanks to the internet, PayPal, KSUSA.org’s web site, the US Kneeboard Surfing Titles and the Phillips Island comp in Australia, there is an international presence now. The best compliment I get is when a kneelo tells me “I don’t even notice or think about the pad when I’m surfing”.  Of course a reorder for the quiver is really cool too.

KM: What’s in the future for Cove Pads?

Casey: Hopefully better surfing by expanding the performance of an overlooked but very important piece of kneeboard equipment.  No distractions, just flowing, hitting it hard and making it. That’s my story and kneelo’s are stickin’ to it. 

To get your Kung-Fu grip handmade and crafted in Costa Mesa, put your order in at the shop.

April 01, 2013

Kung-Fu Grip of Legends

Slyde Kung Fu Grip for your handboard

Sweet Grips For Your Handplane

Slyde Handboards recently added a new line of grips to their online shop.  The Kung-Fu Grip is hand-made by Casey Patelski of Cove Pads in beautiful Costa Mesa. We noticed a few of our riders, most notably Willy Cole, retrofitting their Wedge handboards with grips.  Wax works wonders, but these give an unparalleled kung-fu like grip to your handboard and are the next generation in handplane/handboard control. Born from kneeboarding, Casey is now perfecting the latest in wave riding board grip for handplanes.

A few quick pointers as to why these grips rock: 

  • Eliminates the need for wax
  • Improved directional control and grip
  • Absorbs chop shock
  • Grooved grip top surface
  • Single layer, 3/16 inch (5mm) thick
  • Beveled edge
  • Designed with dynamic features
  • Able to leap tall buildings in a single bound

Below are are few words from Casey and Cove Pads:

KM: Why did you start a kneeboard deck pad company?

Slyde Kung Fu Grip for your handboardCasey: Well, I was surfing Romanosky Kneeboards for maybe 30 years, and Ron Romanosky always offered a rubber deck pad that was recessed into the deck of his boards.  That was a lot better than just wax and hard fiberglass and foam that would delaminate in a matter of weeks. It felt pretty good.  So in 2007, I learned about a website called KSUSA.org and saw a whole international perspective of kneeboarding that I had no idea even existed.  That’s where I saw many new board shapes, fin placements and deck pad designs.  Being a product designer and US patent holder, I love to tinker.  When I get into making something I like to make it functional, high performance with superior materials that fits a majority of users, in this case kneelo’s.  I wanted a high performance deck pad and started trying and studying what was on the market at the time.  Just like the story of the Three Bears, some were too grippy, some were too hard, some were too high, some were not durable, and some were just a pad.  I wanted a durable longer one piece, low center of gravity pad, that I didn’t feel under my ribs; to be able to adjust my stance in mid wave in an instant with a quick release and re-grip that offered more leverage in the foot area with a tail block, that I couldn’t get off the shelf.  I went into “make it as good as it could be mode”.   

KM: So what did you do?

Casey:  I started with a clean slate and started researching and developing materials, thicknesses, grip ranges, adhesives, shapes, all being sport specific to knee boarding.  Having a background in engineered rubber and plastics, I had a good resource base to start prototyping with.  I started surfing the new designs myself and selling the pads out of the back of my truck to my buddies at Kneelo Cove.  These guys would eventually come back with input on how the pads were performing.  I would look into the economics and function possibilities and release the next version with the improvements they wanted.  I owe a lot of the Cove Pad success to the guys at Kneelo Cove here in So Cal for all their input and support during the development days and today.  When you start with a clean slate the possibilities are endless. 

KM: What is the current status of Cove Pads now?

Casey:  Well, we have an IPO on the NY stock Exchange…Bill Gates called me last week…and Eric Clapton wants me to give him kneeboarding lessons… you know, the usual.  No, really I think we have a really good formula now for most surfers because I can make Cove Pads for old school style all the way to state of the art knee board surfing, that have a good purpose built- functional design, with quality and durability,  while offering modifiable design options to a surfers performance requirements.   All Cove Pads are hand made.

As of March 2012, some of the top wining competing kneelo’s are either surfing on Cove Pads or we are designing one for them.  Thanks to the internet, PayPal, KSUSA.org’s web site, the US Kneeboard Surfing Titles and the Phillips Island comp in Australia, there is an international presence now. The best compliment I get is when a kneelo tells me “I don’t even notice or think about the pad when I’m surfing”.  Of course a reorder for the quiver is really cool too.

KM: What’s in the future for Cove Pads?

Casey: Hopefully better surfing by expanding the performance of an overlooked but very important piece of kneeboard equipment.  No distractions, just flowing, hitting it hard and making it. That’s my story and kneelo’s are stickin’ to it. 

To get your Kung-Fu grip handmade and crafted in Costa Mesa, put your order in at the shop.

steve watts
steve watts

Author

Growing up in South Africa, Steve spent his youth dreaming of far off places. After spending eight years extensively traveling to many of the great surf destinations of the world getting dengue fever, having a near death experience from a falling coconut in mexico, Surviving a 15 foot drop on a handboard on a Nias bomb, jumping from every rock he could find without adequate health insurance. and comprehensively debunking the myth there are no waves in Thailand, even if they are small. He decided it was time for a a degree. Steve Graduated from Central Saint Martins School of Art and Design in London with a degree in product design. He missed his graduation to go surfing in Californian, found a kindred spirit with Venice and never left




1 Comment

Ric
Ric

February 28, 2014

Hello Steve.
Was looking for a deck grip for my kneeboard (Surf) and I ran into this article for Kung-Fu grip.
Which is designed and used for hand boards. Are material available for Kneeboards ?
The article also mentions Cove Pads for kneeboards. Is this the same material ?
I’m in the land of Oz, my new board is on order and I’m seeking a decent deck pad.
Your time and info would be much appreciated.

Chow from Ric.

Leave a comment

Comments have to be approved before showing up.

Help-us-spread-the-stoke

SLYDE NEWSLETTER


Sign up for special deals and upcoming releases and events